2AR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  

22030 1.REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

23901 2.DISCONNECT FUEL TUBE SUB-ASSEMBLY

3.REMOVE WIRE HARNESS

23814B 4.REMOVE FUEL DELIVERY PIPE

5.DISCONNECT WIRE HARNESS

12262 6.DISCONNECT NO. 2 PCV HOSE

17111 7.REMOVE INTAKE MANIFOLD

11452 8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Remove the engine oil level dipstick.

b.

Remove the bolt and engine oil level dipstick guide.

c.

Remove the O-ring from the engine oil level dipstick guide.

17118 9.REMOVE MANIFOLD STAY

17139 10.REMOVE NO. 2 MANIFOLD STAY

17167 11.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

17168 12.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

25051 13.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

88310 14.REMOVE COOLER COMPRESSOR ASSEMBLY

88431 15.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

a.

Remove the 4 bolts and No. 1 compressor mounting bracket.

b.

Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the No. 1 compressor mounting bracket.

16.REMOVE WATER BY-PASS HOSE

a.

Slide the clip and disconnect the No. 1 water by-pass hose from the cylinder head sub-assembly.

b.

Slide the clip and disconnect the No. 2 water by-pass hose from the No. 1 water by-pass pipe.

83530 17.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

89422 18.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

19500 19.REMOVE IGNITION COIL ASSEMBLY